Dual 5000W 72V QS260 Electric Car Hub Motor Conversion Kit With Regenerative braking

Category: Motor Conversion Kits.

Description
Inquiry Us

Daul 5000W 72V Electric Car Hub Motor Conversion Kit

The parts list as follows,

2units x QS260 5000W 45H V4 Single Shaft Hub Motor
2units x 5.0 x 12” Alloy Rim
2units x Kelly Controller KLS7245H
1 unit x Programmable Controller
1unit x Pedal Throttle
1unit x Speed Meter(X8-E)
1unit x F.N.R swtich

Note:

1. The kits not included the battery and disc brake set

2. The motor kits suits the vehicle total load under 1000kgs,max.speed about 40-90kph drived by 72V battery

3. Please contact the seller if you have future questions

Key Features,

1. The application of a hub motor can greatly simplify the structure of the vehicle. Traditional clutches, gearboxes and transmission shafts will no longer exist. This also means saving more space.

2. The Daul Controller has been assembled together with the Main contactor on the Alu. plate, so it will be much easier for play and connection

3. Control box combines forward, reverse, master switch and other functions

4. Regenerative Function is available

Items details:

1. QS260 Single Shaft Electric Car Hub Motor(45H) 5000W V4 Type

Motor Specification:

Motor Type: BLDC Hub Motor with Permanent Magnets
Motor design: 260 Single shaft out
Bolts Pattern: 4 x 100MM
Magnet: 45H Curved Magnets with SH(340Degree) Lever
Pole Pairs: 16 Pairs
Rated Power: 5000W
Peak Power: 10000W
Rated Voltage: 72V( 60V-96V Can be optional)
Max No-load RPM: 1320RPM
Max Torque: 230N.M
Max Efficiency: 90%
Brake type: Disc brake
Stator Frame material: Aluimium
Cross Section of Phase wire: 16mm2
Hall sensor phasing angle: 120 degree
Temperature Sensor: Attached
Working Temperature: 70 degree, Peak 120 degree
Waterproof Grade: IP54
W./ G..W. : 18kgs / 20kgs
Package Size: 44*43*41C

Motor drawing:

Kelly SINUSOIDAL WAVE BLDC MOTOR CONTROLL KLS7245H,24V-72V,350A,SEALED IP66, WITH CAN-BUS function

Key Features:

Matching Motor type: BLDC Motor with Hall sensor

Matching Motor power: 4000W-5000W

Supporting CAN

Voltage range: 36V-72V

Support Programmable with various functions

Support Multi-Regenerative Functions:

1. Regen when Braking

2. Regen when taking off the Accelerator

3. Regen with a simulative Pedal

KLS controller is supposed to reduce the noise of BLDC motor,especially for hub motor.The BLDC motor must be based on 3 hall sensors.Customers can program the KLS controller on PC software or Android App.You may need a Z-TEK USB to RS232 cable for programming the controller if you want to program the controller on Android Tablet.

You have to do Identification angle operation before running the motor for the KLS Controllers. And it can be done by PC Program or Andriod App(Though Blue-tooth adaptor).

The details progress will be showed in the Manual of the KLS Controller.

3.0-5V Electric Car Throttle Pedal

Throttle Pedal Hall type : JKH model (match with our motor & controller)
Input voltage: 5V 12V 15V 24V 36V 48V 60V 72V 84V 96V 120V
Output voltage: 0-5V5-0V1-4.2V4.2-1V0-10V10-0V
Deafult: 5v input voltage (depends on controller design, for our matched controllers, you can choose 5v input voltage), 0-5v output voltage.